Dynaudio AIR 15, Reference Manual

Page: 38 / 129

AIR setups
Dynaudio Professional AIR reference manual – 2014-09-28 35
5.1 setup – analog
L
L
L R
R
R
5.1 setup – analog
Master
Left
Sytem Ctrl.
Master
Left
Surround
Master
Center
L R C LFE LS RS
Slave
Right
Surround
Sub
Subwoofer
Slave
Right
Fig. 17: This illustration shows how to connect a 5.1 analog setup.
Understanding and using this setup
►
Audio signals are represented by solid lines.
►
TC link signals are represented by dashed lines.
►
The left monitor is set as the System Controller by
setting the TC Link button on the rear panel to the
“out” position.
►
The left monitor receives both the left and right
input signals.
►
The right monitor receives audio via the TC-LINK
RJ-45 connection from the left monitor.
►
The left surround monitor (LS) receives both the
left and right surround channel signals.
►
The right surround monitor receives audio via the
TC-LINK RJ-45 connection from the left surround
monitor.
►
The center monitor (C) receives both center and
LFE channels.
►
The LFE monitor receives audio via the RJ-45
connection from the center monitor.
►
With no bass management, the subwoofer will play
only the LFE channel.
►
With bass management activated, low-frequency
information from the five main channels is extract-
ed and sent to the subwoofer, where it is summed
with the LFE channel.
►
The AIR Remote or a computer running the AIR
Control software (both optional) can be connected
to any available TC LINK Out connection.