Dynatron 900+, Operator'S Manual

Page: 6 / 32

Dynatron 900
+™
2
INSTALLATION AND FEATURES
UNPACKING
When you receive the unit, immediately unpack it as well as all accessories and check for possible
damage, obvious or concealed. In case of damage, immediately notify the freight carrier and take
any steps necessary to file a claim for the damage sustained. Do not destroy or discard the shipping
carton. The carton should be reused if the device must be shipped for any reason. The carton is
specially designed to protect the unit from shipping damage. Improper packaging of the unit
during transport can result in damage and invalidate the warranty.
Complete the warranty registration form located at the back of the manual and return it to Dynatronics
within 30 days of purchase. This is essential to insure that you are not billed for services that are covered by
the warranty policy. Warranty registration must include the device serial numbers.
Read the operating instructions in this manual carefully before proceeding with a treatment.
Connect the AC power cord, which is equipped with a hospital grade, UL listed plug, to a properly grounded
110/120V 60 Hz AC (220V 60 Hz if applicable) outlet. The power cord must be firmly plugged into the
Dynatron 900+ device. Do not place the cord or the device in a place where the cord could be tripped over
or accidentally pulled out of its socket during a treatment.
STANDARD COMPONENTS
The following accessories are included with the Dynatron 900+:
Qty
Part No. Description
1 Dynatron 900+ Dynatron 900+ Traction System with Power Cord
4 Dynatron 900+HS Hand Screws
1 Dynatron 900+RS Remote Stop
OPTIONAL ACCESSORIES
The following optional and replacement accessories may be purchased from Dynatronics or from your
Dynatronics dealer:
Part No. Description
Dynatron 900+EC Extension Cord
Dynatron 900+CK Conversion Kit