DS32CR \DS42CR \DS46CR \DS46LX \DS55LX Series
2
1.4. Installing and Removing Table Stands (optional)
To install table stands:
1. Power off the display.
2.
Spread a protective sheet on a flat surface.
3. Grab the carrying handles and place the display face-down on the protective sheet.
4. After inserting the stand in the guide block, tighten the screws on both sides of the display.
NOTE: The long-end side of the stand should face to the front while installing.
Thumbscrews
Carrying handle
Longer portions face the front
Table stand
DS32CR series\DS42CR series\DS46CR series
DS46
LX2
Carrying handle
Thumbscrews
Table stand
DS55
LX2
Carrying handle
Thumbscrews
Table stand
