b)
Take out the impeller by 5.5mm spanner.
c)
Turn over the impeller, take off the screw as, change the clearance sensor.
7 Replace small motor
a)
Take off the left ,right cover, disconnect the small motor.
b)
Loose the screw on the bottom of the power board ;take off the small motor chain., Take off the
screws as picture by”+” shape screwdriver, take out the turning wheel. Take off the small motor,
Pull out the connecting wire from the hole after take off the small motor.
Replace the small motor ,and recover all the parts.
Summary of Contents for DCI020-M
Page 1: ......
Page 7: ...3 3 plug board and electronic program 4 Sensor position ...
Page 21: ......
