4. replace the UV assembly
a)
Take off the left cover, then take off the up cover,
b)
Take off the jack of UV assembly, take out the plastic cover, pull the connector.
c)
Turn up the UV assembly right side by “_”shape screw driver, take off the screw on the UV
assembly. pull out the connecting line .
5. Replace the speed sensor
a)
Open the left cover, loosing two screw , take off the dust cover,
take off the screw as picture by “+”screw driver, recover all the parts connect the power and
test.
6 Replace the clearance sensor
a)
Open the left and right sides covers, Disconnect the clearance sensor.
Pull the impeller upside.
Summary of Contents for DCI020-M
Page 1: ......
Page 7: ...3 3 plug board and electronic program 4 Sensor position ...
Page 21: ......
