Dynapac SMART Poker SMART28, Instructions And Spare Parts Catalogue

Page: 9 / 27

INSTRUCTIONS MANUAL – SMART
File: 4700368698_ENG_NO.doc Page 9 / 28
SMART28 SMART40 SMART48 SMART56 SMART65
SMART-E40 SMART-E48 SMART-E56
SMART-
E65
230V 230V 115V 230V 115V 230V 115V 230V
Stator resistance
(Ohm)
36 26.50 6.6 9.30 2.4 5.6 1.5 2.6
Input current (A)
(Out of concrete)
0.9
1.9 3.8 2.2 4.4 2.7 5.4 3.7
VIBRATING ELEMENT AN
The vibrating elements are maintenance free.
The vibrating elements are lubricated with oil (see «Maintenance/Lubrication»).
The end cap of the poker is glued (see «Maintenance/Locking torque»).
DO NOT USE HIGH PRESSURE WATER JET TO CLEAN THE ELECTRICAL PARTS
(Plug, cable, electronic unit)
LUBRICATION
VIBRATING
ELEMENT
OIL : SHELL T46
QUANTITY PER VIBRATING ELEMENT ( cm
3
) / (cl)
AN28 10 / 1
AN40 5 / 0.5
AN48 10 / 1
AN56 15 / 1.5
AN65 20 / 2
LOCKING TORQUE
The end cap is secured in the tube with glue.
Before fitting a new cap, carefully clean threads of cap and tube. The parts must be perfectly dry: no oil,
grease etc...
Then lay down 4 glue cordons on the end cap thread, perpendicular to the thread, all the thread length. No
glue inside the tube. Lock the cap in respect with the torque value here below. Then let the glue to polymerize
during 6 hours, before use.
Vibrating element Tightening torque / Gluing
AN28
End cap 1 : 75Nm + Loctite 243
Reducer 4 : 120Nm + Loctite 243
Screw 28 : Loctite 243
AN40
End cap 1 : 170Nm + Loctite 638
Nipple 3 : 120Nm + Loctite 243
Screw 11 : 5Nm
Trust-screw 15 : Loctite 243
Screw 22 : Loctite 243
AN48
End cap 1 : 350Nm + Loctite 638
Nipple 3 : 200Nm + Loctite 243
Screw 11 : 8Nm
Trustscrew 15 : Loctite 243
Screw 22 : Loctite 243