Dynapac CS 141, Maintenance Manual

Page: 5 / 29

3
CS 141 M141EN4
LUBRICANTS AND SYMBOLS
Other fuel and lubricants are required for
operation in extremely high or extremely low
ambient temperature. See chapter “Special
instructions”, or consult Dynapac.
Engine, oil level Battery
Engine, oil filter Sprinkler
Hydraulic reservoir, level Sprinkler water
Hydraulic fluid, filter Fuel gauge
Lubricating oil Fuel filter
Coolant, level Recyclable
Air cleaner
Always use high-quality lubricants in the
amounts recommended. Too much grease or oil
can cause overheating and subsequent
increased wear.
ENGINE OIL, Shell Rimula TX SAE 15W/40 or equivalent
ambient temperature -10°C - +50°C API CF-4/SG, (CD/CE)
(14°F – 122°F )
HYDRAULIC FLUID,
ambient temperature Shell Tellus TX68 or equivalent
l-10°C - +40°C (14°F – 104°F)
temperature. over +40°C
Shell Tellus TX100 or equivalent
BIOLOGICAL Shell Naturelle HF-E46
HYDRAULIC FLUID When the machine leaves the factory, it may be
filled with biologically degradable fluid. The same
type of fluid must always be used when changing
or topping off.
GREASE SKF LGHB2 (NLGI-Klass 2) or equivalent for the
articulation.
Shell Retinax LX2 or equivalent for other grease
points
FUEL See engine manual
COOLANT Shell Anti Freeze 402 or equivalent
50/50 mixture with water Anti-freeze down to about -35°C (-31°F)
CAUTION
CAUTION