Dynapac CS 141, Maintenance Manual

Page: 11 / 29

9
CS 141 M141EN4
EVERY 10 HOURS OF OPERATION (Daily)
Coolant level – Check
Check the level with the engine stopped and cold.
Coolant should reach the top level mark (1) in the
radiator expansion vessel.
The coolant is hot and under pressure and
the escaping steam can cause serious
scalding. Open the filler cap carefully to
release the pressure. Wear protective
goggles and protective gloves.
Make sure that cooling air flows freely through the
protective grille to the engine.
Fig. 3 Radiator filler hole
1. Level mark in expansion vessel
(max./min.)
1
Engine hood support
Place the roller on a level base. The engine
must be switched off and the reserve/
parking brake knob pushed in for all check-
ing and adjustments on the roller unless
otherwise specified.
Ensure that the engine hood support is
securely in position for all work in the
engine compartment.
Fig. 2 Engine compartment
1. Engine hood support
1
Diesel engine
– Checking the oil level
Beware of hot parts of the engine and hot
radiator when taking out the oil dipstick.
Risk for burns.
Pull the dipstick (1) up and check that the oil level is
between the upper and lower marks.
See the engine manual for further details.
1
Fig. 4 Engine compartment
1. Dipstick
WARNING
WARNING
WARNING
WARNING