24
CP221/271 O221EN5
HOISTING
Lifting the roller
Fig. 31 Roller prepared for lifting
1. Hoisting plate
Ensure that the front wheels are in line with the frame
before lifting the roller.
Place the lifting chains in the lifting lugs and make
certain that no part of the machine is damaged by the
chains when lifting.
The maximum weight of the machine is
noted on the lifting plate (1). See also
technical specifications in the maintenance
instructions.
Lifting tackle, such as chains, steel wires and
lifting hooks must be dimensioned in
conformance with current regulations.
Do not walk under a suspended load.
Ensure that the hooks of the lifting chains
are fitted securely in their positions.
Weight: See hoisting plate
on the roller
1
PARKING
Chocking the wheels
Master switch
Turn off the master switch (1) and remove the handle
before leaving the roller.
This will prevent battery discharge and will also make it
difficult for any unauthorized person to start and drive
the machine. Also lock the doors to the engine
compartment.
Never leave the drivers platform without
pressing in the parking brake knob.
Make sure that the roller is parked in a safe
place for traffic. Chock the wheels if the
roller is parked on sloping ground.
Turn the ignition to position
O
and lock the protective
cover over the instrument panel with a padlock.
Remember the risk of freezing during the
winter. Empty the water tanks, pumps and
leads.
1
Fig. 29 Chocking the wheels
1. Chock
Fig. 30 Engine compartment, right side
1. Master switch
1
