Dynapac CC 222, Maintenance Manual

Page: 5 / 33

3 CC 222/222C - CC 232/232C - CC 322 M222EN5
LUBRICANTS AND SYMBOLS
ENGINE OIL, Shell Rimula TX SAE 15W/40 or equivalent
ambient temperature API Service CD/SE, CD/SF
-10°C - +40°C (14°F - 104°F)
HYDRAULIC FLUID,
ambient temperature
Shell Tellus TX68 or equivalent
-10°C - +40°C (14°F - 104°F)
ambient temperature
Shell Tellus TX100 or equivalent
higher than +40°C (above 104°F)
BIOLOGICAL Shell Naturelle HF-E46
HYDRAULIC FLUID When it leaves the factory, the machine may be filled
with biologically degradable fluid. The same type of
fluid must be used when changing or topping off.
DRUM OIL, Mobil SHC 629 or equivalent
ambient temperature
-15°C - +40°C (5°F - 104°F)
GREASE SKF LGHB2 (NLGI Class 2) or equivalent for the
articulated joint
Shell Retinax LX2 or equivalent for other grease points
FUEL See engine manual
Other fuel and lubricants are required for operation in ex-
tremely high or extremely low ambient temperature. See
the “Special instructions” chapter, or consult Dynapac.
Engine, oil level Air filter
Engine, oil filter Battery
Hydraulic reservoir, level Sprinkler
Hydraulic fluid, filter Sprinkler water
Drum, oil level Recycling
Lubricating oil Fuel filter
Air pressure Sprinkler, tires
Always use high-quality lubricants in the recommended
amounts. Too much grease or oil can cause overheating
and subsequent increased wear.
CAUTION
CAUTION