Dynapac CA 251, Maintenance Manual

Page: 14 / 32

12 CA 251 M251-1EN1
EVERY 10 HOURS OF OPERATION (DAILY)
Refuel every day at the end of work. Top up to the
lower edge of the filler pipe. Use diesel fuel in
accordance with the engine manufacturer’s
specifications.
Stop the diesel engine. Short (press) the
filler gun against a non-insulated part of
the roller before refuelling, and against the
filler pipe (1) while refuelling is in progress.
CA 251 holds 265 litre (70 gal) fuel.
Fuel tank – Refuelling
Check the level and fill the emulsion tank as required.
The emulsion fluid is only for lubricating the tyres. The
pump and filter are located inside the cover at the
bottom of the tank.
Remember the risk of freezing during the
winter. Empty the tank, pump and leads.
Emulsion tank (CA 251A)
– Filling
2
1
Fig. 13 Left side of frame
1. Emulsion tank
2. Place for pump and filter
Fig. 12 Fuel tank
1. Filler pipe
1
Washing fluid
– Checking/Filling (Cab)
Fig. 11 Engine compartment
1. Washer bottle
Open the right-hand cover of the engine compartment
and fill the washer fluid bottle (1).
Remember the risk of freezing during the
winter. Empty the tank, pump and leads.
1