Dynamode DYV-10, User Manual

Page: 4 / 91

•
Connect either a optical or coaxial output with amplifier input.
【NOTE】: Setup digital output under AUDIO menu as HDMI LPCM.
◇ CONNECTING COMPUTER
•
power on the player
•
connect a USB cable to the port.
•
connect the other end of cable to your computer.
•
Storage device connection (usb drive, mp3, hard disk etc) after
boot, press copy button to copy the contents from usb to hard disk.
◇ AUDIO/VIDEO CONNECTION
•
plug the 3-colour-av cable to the dock properly.
•
plug the other ends to the outputs of TV, after connection you may
playback files on TV display.
◇ HDMI OUTPUT(AV OUT)
•
plug the HDMI cable to the dock properly.
•
plug the other ends to the outputs of TV.
◇ STEREO SYSTEM CONNECTION
•
connect RCA cable bundles to S/PDIF ports, if use optical cable,
please Connect to S/PDIF ports.
•
plug cable bundle to stereo system ports.
◇ POWER CONNECTION
•
connect AC adaptor to the DC interface of player.
•
connect player to the AC power.
◇ INTERNET CONNECTION
•
Please prepare an internet cable as below:
•
connect the internet plug to RJ45 dock of player.
•
connect the other end to router or internet devices.
◆
◆ ◆
◆ FIRST
FIRST FIRST
FIRST US
US US
USA
AAAGE GE GE
GE
◇ REMOTE CONTROL
•
First use of remote control - please install the batteries!
•
Power ON player will enter power on status when supplied with power.
The front panel will change to blue
when ON
4