Dynamix DW 2 FXO User Manual Download Page 58

Page: 58 / 85

Dynamix DW-2/4 FXO SIP Gateway User Manual

VoicePacketizermain comming

WorkMode : PROXY_MODE

incoming InitCallArray....REAL_MAXCALL=2

SIP stack was constructed successfully. Version - 2.2.1.8

Start registering to Proxy server

AC4804[0] is ok

successful 1 2

Initialize OSS libraries...OK!

VP v1.44 stack open sucessfully.

login:

4.2.5 [flash]

This command will clean the configuration stored in the flash ROM and
reboot Gateway in factory default setting.

Parameter Usage:

-clean clean all the user defined values, and reboot Gateway in factory

default mode.

Note: It is recommended that use “flash –clean” after

application firmware id upgraded.

4.2.6 [commit]

Save changes after configuring Gateway.

----------------------------------------------------------------------------------------------

usr/config$ commit

This may take a few seconds, please wait....

Commit to flash memory ok!

usr/config$

Note: Users shall use commit to save modified value, or they will not be

activated after system reboot

Summary of Contents for DW 2 FXO






















































































Search results

Summary of Contents for DW 2 FXO

Reviews:

Related manuals for DW 2 FXO

Brands by name

Popular brands

Dynamix DW 2 FXO, User Manual

Search results

Summary of Contents for DW 2 FXO

Reviews:

Related manuals for DW 2 FXO

Brands by name

Popular brands