Dynamix DW-2/4 FXO SIP Gateway User Manual
2.4.2 Configure the gateway into the Proxy mode
Figure 2.17: Configure the Proxy info
2
Press
the
OK
button
that
is
on
the
bottom
of
this
page
to
save
the
configuration
.
3
Switch
to
the
Security
Config
page
and
put
the
user
account
and
password
in
the correct table. Please get this info from your ITSP. Press the
OK button if the configuration is finished. (see figure 2.20)
25
1
Enter the SIP configuration
table and change the mode from Peer-to-Peer to
Proxy mode. To change the Proxy information from your service provider (Ex. The
Proxy IP, Outbound Proxy IP and Registered Number)
