EN
MAINTENANCE
It is preferable to regularly check:
- That the power cable is in good condi-
tion (the copper wires in the cable
should not be visible).
- That the tube is watertight (by visual-
ly inspecting the seal condition after
having removed the blades).
- That the blades are sharp. Replace the
blade if necessary.
If the power cable is damaged, it must be
replaced by the manufacturer, its after-
selfs service or people of similar qualifica-
tion to avoid danger.
ELECTRIC REQUIREMENTS
The mixer of a class 2 category (double
insulation) powered by a single phase
alternating current and does not require a
“u” ground plug.
The installation must be protected by a
ground fault circuit breaker and a 10 A
calibre fuse.
Use a standard 10/16 A single phased
socket.
Check that the electricity supply voltage
and the value on the charger specifications
plate are compatible.
ELECTRICAL DIAGRAM
CERTIFICATE OF CONFORMITY
CUSTOMER SERVICE AND
WARRANTY
This machine is in accordance with CE
standards and :
•
Customer service and warranty:
Should your unit require service, contact
your distributor for the nearest autho-
rized service centre if you wish your
unit to be serviced by the manufacture
ship it to :
CANADA SERVICE CENTRE
DYNAMIC
INTERNATIONAL LTD.
3227 Boul. pitfield
Saint-Laurent - Québec H4S-1H3
Toll free phone : 1-800-267-7794
Toll free fax : 1-877- 668-6623
Local Phone : (514) 956 0127
Local Fax : (514) 956 8983
User guide - Dynamix
Moteur
S1
N
L
0.1 uf
Filtre/C-E-M
Variateur
Motor
Filter / C-E-M
Variator
551050-060 G20M
10