1 About this manual
This manual can help you understand and install the Dynamic Controls DX Heavy Duty Switch Joystick
(DX-RJM-HD) Secondary Remote. It describes the general principles, but it gives no guidelines for
specific applications. If there is a specific requirement for your application, please contact Dynamic
Controls or one of the sales and service agents to assist you.
The product is part of the DX System. This manual must be read together with the DX System
Manual and all other relevant DX and DX2 component manuals.
In this manual, a few symbols will help you identify the purpose of the paragraph that follows:
Notes:
Notes provide supporting information in order to install, configure, and use the product. Not
following the instructions given in notes or precautions can lead to equipment failure.
Warnings:
Warnings provide important information that must be followed in order to install, configure, and use
the product safely and efficiently. Not following the instructions given in a warning can potentially
lead to equipment failure, damage to surrounding property, injury or death.
The term ‘programming’ used in this manual refers to adjusting parameters and configuring options
to suit an application. ‘Programming’ does not change or alter any software within the controller and
is performed using a controlled programming tool available only to authorised personnel.
The term ‘accessory’ used in this manual refers to equipment that is ancillary to the main functioning
of the DX System. It does not refer to an accessory of the wheelchair. The DX System is a component
of the wheelchair.
The DX System is not user serviceable. Specialised tools are necessary for the repair of any
component.
Do not install, maintain or operate this equipment without reading, understanding and following this
manual – including the Safety and Misuse Warnings – otherwise injury or damage may result. This
manual contains integration, set-up, operating environment, test and maintenance information
needed in order to ensure reliable and safe use of the product.
Due to continuous product improvement, Dynamic Controls reserves the right to update this
manual. This manual supersedes all previous issues, which must no longer be used.
Dynamic Controls reserves the right to change the product without notification.
Any attempt to gain access to or in any way abuse the electronic components and associated
assemblies that make up the wheelchair system renders the manufacturer’s warranty void and the
manufacturer free from liability.
Dynamic Controls, the "dynamic" logo, the DX logo and the DX2 logo are trademarks of Dynamic
Controls. All other brand and product names, fonts, company names and logos are trademarks or
registered trademarks of their respective companies.
GBK59690 DX Heavy Duty Switch Joystick
Installation Manual Issue 5
About this manual - Page 1
