Dynamic Projection MH27, Quick Installation Manual

Page: 8 / 8

Channel Function Value Destination Description
001 Pan high 0 - 255 Mirror motors Pan High Byte
002 Pan low 0 - 255 Mirror motors Pan Low Byte
003 Tilt high 0 - 255 Mirror motors Tilt High Byte
004 Tilt low 0 - 255 Mirror motors Tilt Low Byte
005 Reset 255 Mirror motors Starts mirror recalibration
006 Picture mute off 0 - 10 RS232 / projector Disables picture mute
006 Picture mute on 20 - 30 RS232 / projector Enables picture mute
006 Shutter off 40 - 50 RS232 / projector Disables the mechanical shutter
006 Shutter on 60 - 70 RS232 / projector Enables the mechanical shutter
006 Picture freeze off 100 - 110 RS232 / projector Disables picture freeze
006 Picture freeze on 120 - 130 RS232 / projector Enables picture freeze
007 Image orientation 1 10 - 63 RS232 / projector Image orientation mode 1
007 Image orientation 2 64 - 127 RS232 / projector Image orientation mode 2
007 Image orientation 3 128 - 192 RS232 / projector Image orientation mode 3
007 Image orientation 4 192 - 255 RS232 / projector Image orientation mode 4
008 reserved - - -
009 Motor and LED drivers on 28 - 38 Mirror motors & LED Turns the drivers on
009 Motor and LED drivers off 50 - 58 Mirror motors & LED Turns the drivers off
009 Lamp mode 1 130 - 138 RS232 / projector Lamp power mode 1
009 Lamp mode 2 150 - 158 RS232 / projector Lamp power mode 2
009 Lamp mode 3 170 - 178 RS232 / projector Lamp power mode 3
009 Lamp on 230 - 238 RS232 / projector Lamp lamp on
009 Lamp off 250 - 255 RS232 / projector Lamp lamp off
010 LED intensity 0 - 255 LED Main intensity of the combined RGB LEDs
011
LED red 0 - 255 LED Red LED intensity
012 LED green 0 - 255 LED Green LED intensity
013 LED blue 0 - 255 LED Blue LED intensity
014 reserved - - -
Valid for firmware version 1.3.26
8
Copyright © 2014 - 2022‚ by Dynamic Projection Institute GmbH. All rights reserved. http://www.dynamicprojection.com
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
DMX fixture definition
In order to control the Mirror Head at least a 14 channel DMX Master is required no matter what kind of Mirror Head and/or function of the
fixture you use (see section „Using and operations“ for details).
av
ailable f
or
MH08 – MH1
3 only
QIG - Version 2.6
Mirror Head Quick Installation Guide
For the full manual please visit http://dynamicprojection.com/mirror-head-assembly