Install Video at
www.DynamicMounting.com/Install
9
9
Attaching the Television to the Mount
After the above steps are finished you are ready to put the television on the mount.
1.
Drive Mount up and down, ensuring everything is working as expected.
2.
Drive mount to the lowest position, if the mount would hit the shelf, set lower position so that it won’t.
3.
Unplug the power to avoid any accidental movement.
4.
We recommend having someone help putting the TV on the mount.
5.
Hook the TV Hangers (with the TV attached to them) over the Hook Plate as shown in Figure 12.
6.
Adjust the television so that it is centered on the mount.
7.
Hit the Hanger Locks as shown in Figure 13 to lock the TV to the mount.
8.
Plug the power in and move around.
Figure 12, Attaching the Television
Figure 13 TV Hanger Locks
TV Level
The Level of the TV can be fine-tuned +/- .5 degrees after it is
put on the mount.
1.
Figure Out which TV Hanger is on the low side of the TV
2.
Figure 14 shows the parts for Leveling
3.
Unlock Hanger Lock as shown in Figure 13
4.
Move the Level Bolt Down Until Level
5.
Lock Position with the Level Locknut
6.
Lock the TV Hanger as shown in Figure 13
Figure 14, TV Level Fine Tuning
