Leaders in Pipelin
e Survey Systems
C
C
C
-
-
-
S
S
S
C
C
C
A
A
A
N
N
N
2
2
2
0
0
0
1
1
1
0
0
0
SYSTEM MANUAL Version 6.03i
18
3.5.1. LCD Contrast
The LCD display on the C-SCAN Detector uses a temperature sensor to track the contrast
with ambient temperature. In normal use this will only need to be adjusted to suit personal
preference, but in cases of extreme temperature the contrast on the display may require
adjustment. If the temperature is hot then the display will begin to darken and the contrast
will need to be manually reduced. Likewise, if the temperature is very cold the screen will
lighten and the contrast will need to be increased. Simply select the
CONTRAST
button
and either decrease or increase the contrast using the
◄
and
►
buttons. To confirm
your selection press .
If the contrast is manually changed during extreme temperatures, the display may become
unreadable when the Detector is returned to ‘normal’ temperatures making it difficult to see
the contrast controls on screen. In this instance ensure that the Detector is OFF by
switching the main power isolator OFF. After waiting for a few moments turn the switch
ON to activate the Detector – the GPS LED will illuminate briefly during start up. Wait for a
few moments to allow the Detector to complete its checks and then press the
CONTRAST
(
) key twice. This will reset the contrast to factory default.
3.5.2. LCD Backlight
The C-SCAN Detector is fitted with a LCD backlight to assist during low light conditions.
The backlight is ON by default and as it uses very little power it can generally be left in this
state. To toggle the backlight between ON and OFF simply select the
BACKLIGHT
button
.
3.6. Detector Unit – Keypad
The Detector Unit keypad is used to navigate through the various different screens used
during a survey or to study the saved data. The main function keys are described below:
ON / OFF key
14 Function keys
Help key
Back key
Enter key
Download key
Contrast key
NO
key ( )
YES
key ( )
GPS Indicator
Backlight key
