Page 4
2280-TJ80 MANUAL - FORM 2280TJ-001
MODEL 2280-TJ80 SINGLE/INSWING
ELECTROMAGNETIC LOCK
INSTALLATION INSTRUCTIONS
4/07
705 Emmett Street Bristol, CT 06010
1-877-DynaLock www.dynalock.com
ATTACH THE ARMATURE TO THE ARMATURE MOUNTING BRACKET
ASSEMBLE THE ARMATURE MOUNTING BRACKET
Locate the two 1/4- 20x1/2” ar ma tur e
mounting bracket assembly screws and lock
washers from the hardware kit and assemble
the bracket as shown.
Firmly tighten the mounting screws with a
5/32” hex wrench. They may be loosened
later for adjustment, as necessary.
Attach the Armature Housing to the top Armature Mounting Bracket using
four (4) 8-32x3/8” Armature Housing Screws.
Attach the armature to the armature mounting bracket as shown.
Firmly tighten the Armature Mounting Screw using a 3/16” hex wrench.
Failure to properly secure the armature to the bracket could result in
serious injury or possible security breach.
UPPER ARMATURE
BRACKET
LOWER ARMATURE BRACKET
LOCK WASHER
BRACKET ASSEMBLY SCREW
ARMATURE
SPACER
FLAT
STEEL WASHER
ARMATURE
MOUNTING
SCREW
ARMATURE MOUNTING BRACKET
ARMATURE HOUSING
ARMATURE
ARMATURE HOUSING SCREW
