ADSL Central Splitter
Quick Set-up Guide
Features
High quality low pass filter with optimum performance
Surge and overload current protection
Wall mounting facility
Multiple input and output termination
Additional wall outlet not required
Location for installation:
The ADSL splitter/filter should be installed into the premises telephone wiring
on the customer side of any telephony connections, i.e. before the first outlet or
branching point.
Important Safety Instructions:
1. Read and understand all instructions
2. Do not install this product near water for example, in a wet basement or near
a swimming pool.
3. To reduce the risk of electric shock, do not disassemble this product. If service
or repair work is required contact a qualified personnel. Opening or removing
covers may expose you to dangerous voltages or other risks. Incorrect re-
assembly can cause electric shock when the appliance is subsequently used.
4. Refer servicing to qualified service personnel under the following conditions:
If liquid has been spilled into the product.
If the product does not operate correctly, i.e. if the telephone or ADSL
service is disrupted by the installation of the filter.
If the product has been dropped or the housing has been damaged.
If the product exhibits a distinct change in performance.
