Pilot Operating Handbook
H3 EasyFlyer Sport
SECTION 1
GENERAL
Dynali_POH_H3 EasyFlyer Sport Rev. 2.5
– Issue date 30.10.2020 Page
10
1.6
DESCRIPTION
The Dynali H3 EasyFlyer Sport is an ultralight two-seat helicopter in a side-by-side
seating configuration. The main structure is a stainless steel chassis which frames the
engine, the cabin, the tail structure and all the main and rear transmission.
The main rotor mast is made from steel and the main rotor blades are in extruded
aluminum or molded carbon. The rotor head is controlled by push-pull rods through the
swash plate.
The tail structure is made of an aluminum boom, supported by two carbon tail struts.
The tail rotor blades are formed in carbon and are controlled by push-pull cables. The
cabin cell and the stabilizer are made from vacuum infused carbon fiber and the canopy
is in perspex.
1.7
TECHNICAL CHARACTERISTICS
GENERAL
Airframe length ..................................................................................
6.20 m
Maximum Length (including main rotor) ............................................
8.00 m
Height ...............................................................................................
2.50 m
Height on wheels ..............................................................................
2.60 m
Interior cabin width ............................................................................
1.30 m
Width of undercarriage ......................................................................
1.80 m
Empty weight………………………………
285 kg (standard configuration)
MTOW (max.)………………….. .........................................................
450 kg
Fuel tank capacity .................................................................................
60 L
Regular fuel ...............................................................
Unleaded 98 or UL91
Low level warning light ..........................................................................
15 L
Instrument reading ................................
(1/2 = 34L) (1/4 = 22L) (0/4 = 15L)
MAIN ROTOR
2-blade pitch articulated, semi-rigid on teetering hinge
Diameter............................................................................................
7.14 m
Number of blades .......................................................................................
2
Blade chord ........................................................................................
18 cm
Blade twisting ............................................................................................
0°
Blade weight ........................................................................................
12 kg
Blade tip speed at 100% of nominal configuration .......................
690 km/h
TAIL ROTOR