17
3. With a 10mm wrench, loosen the
brake cable anchor and disconnect the
cable.
Note:
Get all the anchor hardware out
of the brake arm hole and keep them
together to avoid losing.
4. Use two 15mm wrenches, to loosen
the axle locknuts. (Remove axle
locknuts and safety retainer washers
from axle and keep them together to
avoid losing them).
5. Press the chain tensioner down
with your hand so as to get the chain
off. Then slide and remove the wheel.
(Replace with a new chain, new rear
brake or new rear wheel if needed at
this time).
