24
en | Technical data
IPX Series DSP Multichannel Networking Power
Amplifier
2018.04 | 01 | F.01U.330.705
Installation manual
Bosch Security Systems, Inc.
A-weighted, analog input
112 dB
A-weighted, digital input
115 dB
Output Noise
A-weighted, analog input
< -70 dBu
A-weighted, digital input
< -73 dBu
CONNECTIVITY
Analog Audio Input/Thru
Type
4 x 6-pin Euroblock, male
Maximum Input Level
+21 dBu
Input Impedance, active balanced
20 kΩ
Reference level equal to digital input
+21 dBu for 0 dBFS
Speaker Output
2 x 8-pin Euroblock, 6 mm, female
GENERAL
Power Consumption
Rated power consumption (see BTU
table)
1300 W
1/8 Maximum Output Power at 4 Ω
1780 W
Idle Mode (no input signal)
105 W
Standby Mode
< 18 W
Dimensions
(W x H x D), mm
483 x 88.1 x 514.2
Weight
16.8 kg (37.1 lb)
Shipping Weight
19.1 kg (42.1 lb)
Amplifier at rated conditions, Low-Z Normal operation mode, all channels driven, 4 Ω loads,
Analog input, 32 dB Gain, 48 kHz sample rate, unless otherwise specified.
1
Test signal for max. output power according IHF-A-202 (Dynamic-Headroom, burst 1 kHz/20
ms on/480 ms off/low level -20 dB).
2
Available in Bridge operation mode only.
Summary of Contents for IPX10:4
Page 2: ......
