Paging Console
Owner‘s Manual 9
2.2 Factory Presets
When shipped, the selection keys 1 - n are assigned to the corresponding areas 1 - n offering real
plug‘n‘play; the paging station is ready for operation directly after connection and switching the system
power ON.
The paging stations provide the following factory pre-set functions and characteristics:
ALARM
off
No alarm signal launched
lights red
Alarm signal has been launched from any source
blinks red
Alarm signal has already been stopped, but keeps running until
signal-end
CAUTION:
When connecting several paging consoles to one DPM 8016, setting every single on to
its individual, exclusive address (1...16) is of major importance.
Parameter
Setting / Description
CAN address
0 (disconnected)
Priority
5 (priority for messages)
Name
DPC 8015
Password
Setup menu password protected, Default-Passwort: 2222
Pre-gong signal
Off
Buzzer
On (acoustic alert signal)
Compressor
Off
Optionen
Alarm button
Not programmed
Key-lock switch
Not programmed
PTT microphone
Not programmed
Button
assignment
Selection buttons 1-n
Selecting areas 1...n (button 1 = area 1, button 2 = area 2,...)
TALK
Call in pre-selected areas, priority 5
ON (
n
)
Switching the system ON / OFF, priority 5
PROGRAM (
p
)
Assigns a program to pre-selected areas
STOP (ESC)
Terminates any locally launched signal (gong, text, alarm)
ALL/CLEAR (DEL)
Selecting collective call / deselecting selected areas
Special functions
Not programmed
LED
Status
Description
