DYNACO PWRAMP80, Assembly Manual

Page: 17 / 36

Page 17 of 36
Figure 7-Component locations for the stereo amplifier module
Bend resistor leads to 0.45” width
Designation Value Color Code Done

R34 100 Brown, Black, Black, Black, Brown
R12 100K Brown, Black, Black, Orange, Brown
R13 100K Brown, Black, Black, Orange, Brown
R22 100K Brown, Black, Black, Orange, Brown
R23 100K Brown, Black, Black, Orange, Brown
R28 100K Brown, Black, Black, Orange, Brown
R30 100K Brown, Black, Black, Orange, Brown
R3 10K Brown, Black, Black, Red, Brown
R29 10K Brown, Black, Black, Red, Brown
R7 1K37 Brown, Orange, Violet, Brown, Brown
R17 1K37 Brown, Orange, Violet, Brown, Brown
R15 11K3 Brown, Brown, Orange, Red, Brown

Install it if you’re upgrading an
SCA-80 or SCA-80Q integrated
amplifier.

Don’t install it if upgrading a
Stereo 80 basic power amplifier.
R25 11K3 Brown, Brown, Orange, Red, Brown

Install it if you’re upgrading an
SCA-80 or SCA-80Q
integrated
amplifier.

Don’t install it if upgrading a
Stereo 80
basic power amplifier.
R8 20K0 Red, Black, Black, Red, Brown
R16 20K0 Red, Black, Black, Red, Brown
R18 20K0 Red, Black, Black, Red, Brown
R26 20K0 Red, Black, Black, Red, Brown
R27 20K0 Red, Black, Black, Red, Brown