Dynabrade 61461, Operation And Maintenance Manual

Page: 6 / 34

3.0 IMPORTANT SAFETY PRECAUTIONS
3.1. DEGASSING VENT (OPTIONAL)
A degassing vent is installed on the immersion separator as an optional safety feature
to prevent gas from building up in the immersion separator. Any gas which may develop
escapes through the vent.
IMPORTANT: Refer to separate operating & maintenance instructions for the
degassing vent.
WARNING: It is the user’s responsibility to conduct a risk assessment as
to determine which gas may develop both during operation
and idle time caused by chemical reactions between the liquid
present in the immersion separator and the dusts recovered
and to determine the safety measures to observe in presence
of the concerned gas.
3.2. LAYERS OF DUST
WARNING:
Clean regularly the vacuum cleaner system surfaces with a
damped cloth to avoid dust accumulation which could create a
potential source of ignition.
3.3. FLAMMABLE LIQUIDS
WARNING:
THIS VACUUM CLEANER SYSTEM IS NOT DESIGNED TO
RECOVER FLAMMABLE LIQUIDS. DO NOT USE THIS VACUUM
CLEANER SYSTEM TO RECOVER FLAMMABLE LIQUIDS.
3.4. IMPORTANT SAFETY PRECAUTIONS IN REGARD TO ELECTROSTATIC
CHARGES GENERATION
When the vacuum cleaner system is used as recommended in this manual it has
been determined that no significant or continuous electrostatic charge accumulation,
which could act as a potential ignition source, can occur.
Nevertheless, it is recommended for safe use not to perform any specific action on
the insulating items assembled on the vacuum cleaner system, such as a continuous
and intense manual rubbing, which could lead to a significant electrostatic charge
accumulation.
The above instructions are to be observed particularly in regard to the paint coating
on the vacuum cleaner system.