background image

Bluetooth

®

 Modules are designed to be interoperable with any product with

Bluetooth

®

 wireless technology that is based on Frequency Hopping

Spread Spectrum (FHSS) radio technology, and is compliant to:

Bluetooth

®

 Specification (depending on the model you purchased), as

defined and approved by the Bluetooth

®

 Special Interest Group.

Logo certification with Bluetooth

®

 wireless technology as defined by

the Bluetooth

®

 Special interest Group.

This Bluetooth

®

 product is not compatible with devices using Bluetooth

®

Version 1.0B specifications.

The wireless devices have not completed verification of connection and
operation with all devices which are using the Wireless LAN or Bluetooth

®

radio technology.

Bluetooth

®

 and Wireless LAN devices operate within the same radio

frequency range and might interfere with one another. If you use
Bluetooth

®

 and Wireless LAN devices simultaneously, you might

occasionally experience a less than optimal network performance or even
lose your network connection.
If you experience any such problem, immediately turn off either one of your
Bluetooth

®

 or Wireless LAN.

Wireless devices and your health

Wireless products, like other radio devices, emit radio frequency
electromagnetic energy. The level of energy emitted by wireless products
however is far much less than the electromagnetic energy emitted by
wireless devices like for example mobile phones.
Because wireless products operate within the guidelines found in radio
frequency safety standards and recommendations, Dynabook believes
wireless products are safe for use by consumers. These standards and
recommendations reflect the consensus of the scientific community and
result from deliberations of panels and committees of scientists who
continually review and interpret the extensive research literature.
In some situations or environments, the use of wireless products might be
restricted by the proprietor of the building or responsible representatives of
the organization. These situations might for example include:

Using the wireless products equipment on board of airplanes, or
In any other environment where the risk of interference to other
devices or services is perceived or identified as harmful.

If you are uncertain of the policy that applies to the use of wireless devices
in a specific organization or environment (for example, airports), you are
encouraged to ask for authorization to use the wireless device prior to
turning on the equipment.

User's Manual

7-4

Summary of Contents for TECRA A30-J





























































































































Reviews: