dynabook TECRA A30-J User Manual Download | Manualshive

Page: 5 / 124

background image

The Bluetooth

®

word mark is a registered trademark owned by Bluetooth

SIG, Inc.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc. in the United States and other countries.
DTS, the Symbol, & DTS and the Symbol together are registered
trademarks and DTS Audio Processing is a trademark of DTS, Inc.
Wi-Fi is a registered trademark of Wi-Fi Alliance.
USB Type-C™ and USB-C™ are trademarks of USB Implementers Forum.
All other company names, product names, and service names mentioned
herein may be trademarks of their respective companies.

Regulatory Information

The regulatory information herein might vary. Check the ID information on
the bottom of the device or box for specific information applicable to the
model you purchased.

FCC information

This device complies with FCC RF exposure requirements

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Only peripherals complying with the FCC class B limits can be attached to
this equipment. Operation with non-compliant peripherals or peripherals not
recommended by Dynabook is likely to result in interference to radio and
TV reception. Shielded cables must be used between the external devices
and the computer’s Universal Serial Bus (USB 3.1 Gen1) port, USB Type-

User's Manual

1-2

«
...
3
4
5
6
7
...
»

Summary of Contents for TECRA A30-J





























































































































Reviews:

No comments

Related manuals for TECRA A30-J

Brand: IBM Pages: 170

Brand: IBM Pages: 257

Brand: IBM Pages: 63

Master MP1-11TGS Series

Brand: MiTAC Pages: 2

ECS-9740-505M-GTX1050

Brand: Vecow Pages: 111

Brand: Fujitsu Pages: 38

Brand: Fujitsu Pages: 9

Brand: Fujitsu Pages: 10

Esprimo E5 Series

Brand: Fujitsu Pages: 73

DESKPOWER N300 Series

Brand: Fujitsu Pages: 61

Brand: Fujitsu Pages: 56

Brand: Fujitsu Pages: 50

ESPRIMO D5 Series

Brand: Fujitsu Pages: 83

ESPRIMO E420 E85+

Brand: Fujitsu Pages: 8

Brand: Fujitsu Pages: 54

Esprimo C series

Brand: Fujitsu Pages: 58

Esprimo P2 Series

Brand: Fujitsu Pages: 61

ESPRIMO P15 Series

Brand: Fujitsu Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands