Dymo LabelWriter SE300, User Manual

Page: 34 / 132

4-30
SO Set Font to Double Wide
DESCRIPTION
Causes all the text that follows the command on the same line to
be printed as double-wide characters. Double-wide characters are
canceled by a line feed (CR or LF) or the DC4 command.
Double wide is a character attribute and is available on a
character-by-character basis. Double-wide text can be canceled at
any point on the line. Double-wide text is automatically canceled
at the end of the line. Therefore, subsequent lines will not be
printed as double-wide text unless the SO command is re-issued
at the beginning of each line.
SEE ALSO
DC4
EXPRESSION
ASCII SO
Decimal 14
Hex 0E
PARAMETERS
None
EXAMPLE
For an example of this command’s usage, see Appendix A, page
84, Example 5.
For an example of this command using the Caret feature see page
94, Example 5.