Dymo LabelWriter SE300, User Manual

Page: 28 / 132

4-24
Bar Codes
GS A n1 n2 Bar Code Start Position 62
GS W Thin Thick Set Bar Code Element Width 68
GS h n Set Bar Code Height 70
GS k n m d1 … dk Print Bar Code 71
GS w n Set Bar Code Module Width 79
GS x Print MaxiCode Bar Code 80
Miscellaneous
ESC @ Reset to Power-up Condition 38
ESC V Return Firmware Revision 52
ESC W n1 n2 Wrap Data 53
GS ~ Enter Debug Mode 81
GS * n1 n2 t h w d1…dm Landscape Mode Graphics 61
GS L n1 n2 Set Feed Length 64
GS S Return Printer Status 65
GS l n1 n2 l1 l2 m Draw Line in Landscape Mode 73
EL Compatibility
SYN EL Mode Graphics 32
ETB EL Mode Compressed Graphics 34
ESC * Reset to Defaults 37
ESC @ Reset Printer to Power-up Condition 38
ESC A Return Printer Status 39
ESC B Set Dot Tab 40
ESC D Set Bytes per Line 41
ESC E Form Feed 42
ESC L Set Feed Length 45
ESC Q Set Top Margin 48
ESC a Return Hardware Status 56
ESC F 1 Feed Sublines 43
ESC y Set 203 x 203 dpi 56
ESC z Set 138 x 203 dpi 56
Command Reference
The commands are listed by name in alphabetical order. Each
section contains a description of the command. The ASCII,