background image

 

© 2019 Dymax Corporation.  All rights reserved.  

All trademarks in this guide, except where noted, are the property of, or used under license by Dymax Corporation, U.S.A.

 

The data contained in this bulletin is of a general nature and is based on laboratory test conditions.  

Dymax Europe GmbH does not warrant the data contained in this bulletin.  Any warranty 

ap

plicable  to  products,  its  application  and  use  is  strictly  limited  to  that  contained  in  Dymax  Europe  GmbH’s  General  Terms  and 

Conditions  of  Sale  published  on  our  website  at 

https://dymax.com/resources/sales-terms-conditions

 Dymax Europe GmbH does not assume any responsibility for test or performance results obtained by users.  It is the user’s 

responsibility 

to determine the suitability for the product application and purposes and the suitability for use in the user’s inte

nded manufacturing apparatus and methods. The user should adopt such 

precautions and use guidelines as may be reasonably advisable or necessary for the protection of property and persons. Nothing in this bulletin shall act as a representation that the product 
use  or  application  will  not  infringe  a  patent  owned  by  someone  other  than  Dymax  Corporation  or  act  as  a  grant  of  license  under  any  Dymax  Corporation  Patent.  Dymax  Europe  GmbH 
recommends  that  each  user  adequately  test  its  proposed  use  and  application  of  the  products  before  actual  repetitive  use,  using  the  data  contained  in  this  bulletin  as  a  general  guide.                                                     
MAN098EU  7/22/2019 

 

Dymax Corporation

 

+1.860.482.1010 
[email protected] 

www.dymax.com 

Dymax Oligomers & Coatings

 

+1.860.626.7006 
[email protected] 

www.dymax-oc.com 

Dymax Europe GmbH

 

+49 611.962.7900 
[email protected]

 

www.dymax.de 

Dymax Engineering  
Adhesives Ireland Ltd. 

+353 21.237.3016 
[email protected]

 

www.dymax.ie 

Dymax UV Adhesives &  
Equipment (Shenzhen) Co Ltd 

+86.755.83485759 
[email protected]  

www.dymax.com.cn 

 

Dymax UV Adhesives &  
Equipment (Shanghai) Co Ltd  

     

+86.21.37285759  
[email protected]

    

www.dymax.com.cn 

Dymax Asia (H.K.) Limited 

+852.2460.7038 
[email protected] 

www.dymax.com.cn 

Dymax Korea LLC

 

+82.2.784.3434 
[email protected] 

www.dymax.com/kr 

Dymax Asia Pacific Pte. Ltd. 

+65.6752.2887  
[email protected] 

www.dymax-ap.com 

 

 

 

 

 

 

 

Summary of Contents for BlueWave RediCure MX-250 Emitter

















Reviews: