background image

                                                                           

 

 

15

2

 

Overview and Controls 

This section provides information about front panel and rear panel. When you install this series 
DVR for the first time, please refer to this part first.  

2.1

 

Front Panel 

The front panel is shown as in Figure 2-1. 

 

Figure 2-1 

Please refer to the following sheet for front panel button information. 

 

Name Icon 

Function 

Power button 

 

Power button, press this button for three seconds to boot up 
or shut down DVR. 

Shift Shift 

In textbox, click this button to switch between numeral, 
English(Small/Capitalized),donation and etc. 

Activate current control, modify setup, and then move up 
and down. 

Increase/decrease numeral. 

Assistant function such as PTZ menu. 

Up/1 
Down/4  

S

T

 

In text mode, input number 1/4. 

Shift current activated control, 

Left/2 
Right/3 

W

    

X

 

When playback, click these buttons to control playback bar. 
In text mode, input number 2/3. 

Go to previous menu, or cancel current operation. 

ESC ESC 

When playback, click it to restore real-time monitor mode.  

Confirm current operation 

Go to default button 

Enter ENTER 

Go to menu  

Record REC 

Manually stop/start recording, working with direction keys  
or numeral keys to select the recording channel. 

Slow play/8 

 

Multiple slow play speeds or normal playback. 
In text mode, input number 8. 

Summary of Contents for G4 HD-E series































































































































Reviews: