WARNING:
If the lens is not completely seated in hard goggle frame,
the lens may separate during use and cause injury.
Attaching the Mask
To attach the mask to the goggle frame:
1
Hold the goggle in your right hand and the mask in your left hand.
2
Insert two tabs on the bottom right.
3
Insert the nose tab.
4
Insert the two tabs on bottom left. Make sure flap on bottom edge
of goggle frame is inside.
5
Weave strap through ear pieces.
6
Attatch the top posts of the mask into the proper holes on the
goggle according to your preference, see “Adjusting the Mask”.
Inspect the mask attachment carefully. Make sure that there are no gaps between
the mask and the goggle frame.
Adjusting the Mask
The DYE
®
I3 Goggle System has been designed to be adjustable to accomodate
different size faces. Find which adjustment is most comfortable for a sure fit.
1
On the top of the goggle frame
by the strap retention clips, you
will see two larger holes. These
holes will allow you to adjust your
I3 Goggle System to fit more
comfortably on your face.
[See figure 1]
2
The holes towards the edge of the
frame are for a more looser fit around
your face.
3
The holes towards the center of the frame are for a more close
fit around your face.
17
Changing the Soft Earpieces
1
Start out with the goggle frame completely removed from the mask and
strap assembly.
[See figure 1]
2
Push the strap assembly through the ear section of the mask.
3
Push the strap assembly through the soft earpiece.
[See figure 2]
4
Using a flat head screwdriver, unscrew the earpiece retention screw in the
recessed area of the mask.
[See figure 3]
This will free the soft earpiece from the mask. Do not lose the screw.
5
Next, attach the new earpiece in the same position and follow steps 2-4
in reverse order.
6
Finally, attach the goggle frame to the mask and reassemble the strap
assembly to the goggle frame.
18
1
1
2
3