3
Product Diagram
1) To remove the HDD tray: press and hold the tray blue part with your thumb
and index finger to pull the tray outward, install the HDD onto the tray, then
place the tray back to the enclosure, please put the bottom of the tray parallel
on HDD tray, so that it can be pushed and slide in to place.
2
）
HDD status LED
：
Blue Light - the hard disk working properly , Blinking RED
light indicate RAID error or HDD error
：
Blinking RED light - the hard disk to read and write,
or Blinking RED when RAID rebuild
3) Power Switch: to turn ON or OFF the device power.
4) RAID0/JBOD/RAID1 LED: indicate RAID mode, It’s Normal mode when the
three led lights aren’t light
5) Reset: Press Reset button when changing the RAID mode setting
6) RAID: RAID mode jumper switch, please see Section # 4-2 below for more
details
6) USB3.0 Port: to be connected to an USB3.0 port of a PC with the enclosed
USB3.0 cable.
7) Power input: DC12V power input socket
8
）
FAN
：
Smart Fan, When one of the hard disk temperature reached 40℃ then
the Fan run, If all off the hard disk temperature is lower than 38℃, the Fan will
stop automatically.
Specifications:
Support HDD:
2.5”/ 3.5” Sata HDD
Compatible OS: Windows Vista 7, Windows 8, 10,
Mac OS 10.4 or above
Approval Safety: CE and FCC Approval
Material:
SECC metal construction
Dimensions:
5.19” W x 4.5” H x 8.75” D
(132 W x 114 H x 222 D mm)
Weight:
3.8 lbs (1.7kg)
Operation Temp.: 5˚C / 40˚C
Storage Temp.: -20˚C / 70˚C
Summary of Contents for RAID Vault 2
Page 1: ...www dyconn com RAIDVault2 2 Bay 2 5 3 5 HDD RAID Enclosure SUPERSPEED USB 3 0 ...
Page 2: ......
Page 12: ......
