9
Offline Compare mode
How to perform the Offline Compare Process
NOTE: For Offline Compare Mode, the source drive must be placed in
Bay 6. Also, make sure Bay 1 is Empty.
1. Insert the Source HDD into Bay 6, followed by the placement of Target
HDDs into Bay 2, 3, 4, 5.
2. Turn On the Power to the Dubbler Dock Pro+.
3. Once the HDD Bay LED indicators illuminate, the Dubbler Dock Pro+ is
ready to perform the compare operation.
4. Press and Hold the Clone button for 6-seconds until the indicator LED
light is blinking orange. Press the button once more for compare
confirmation while all LED lights are still blinking orange.
5. Offline compare operation is now initiated and is underway. The 25%
LED light will begin blinking to represent the start of the compare process.
The 50%, 75% and 100% LED indicator lights will commence to flash in
sequence pursuant to the progression of the compare process.
6. Once the compare process is finished, all progress LED indicator lights
will illuminate orange.
If there is a compare error, the R/W LED will illuminate Red to indicate
which HDD has failed.