Halo E234478, Operating Instructions Manual

Page: 1 / 16

W I R E L E S S C H A R G I N G D O C K
W I T H P O W E R B A N K
PLEASE READ BEFORE OPERATING THIS EQUIPMENT
Contains a 10,000 mAh internal battery
HALO WIRELESS CHARGING DOCK WITH POWER BANK
Thank you for choosing the HALO WIRELESS CHARGING
DOCK WITH POWER BANK.
Please read the operating instructions carefully before using
the HALO WIRELESS CHARGING DOCK WITH POWER BANK.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING: When using this product, basic precautions
should always be followed, including the following:
• Read all the instructions before using the product.
• To reduce the risk of injury, close supervision is necessary
when the product is used near children.
• Do not put fingers or hands into the product.
• Do not expose product to rain or snow.
• Use of a power supply or charger not recommended or
sold by product manufacturer may result in a risk of fire
or injury to persons.
• Do not use the product in excess of its output rating.
Overload outputs above rating may result in a risk of fire or
injury to persons.
• Do not use the product that is damaged or modified.
Damaged or modified product may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury.
• Do not disassemble the product. Take it to a qualified
service person when service or repair is required. Incorrect
reassembly may result in a risk of fire or injury to persons.
• Do not expose a product to fire or excessive
temperature. Exposure to fire or temperature above
100°C/212°F may cause explosion.
• Unplug the product when not in use.
• Improper use of this product may result in product
damage, excess heat, toxic fumes, fire or explosion, for
which damages you (“Purchaser”), and not HALO2CLOUD
LLC. (HALO) (“Manufacturer”) are responsible.
• This product should be operated only in open-air
conditions. It should not be operated in an enclosed,
unventilated space such as a carrying bag, pocket, purse or
bedding. Failure to follow these instructions may damage
the product by overheating.
• Be cautious of drops, bumps, abrasions, or other impacts to
this product. If there is any damage to the product such as
dents, punctures, tears, deformities, or corrosion due to any
cause, discontinue use. Contact Manufacturer or dispose of
it in an appropriate manner.
• Do not disassemble this product or attempt to re-purpose
or modify it in any manner.
• Do not attempt to replace any part of this device.
• Have servicing performed by a qualified repair person using
only identical replacement parts. This will ensure that the
safety of the product is maintained.
• Never dispose of batteries in the garbage. Disposal of
batteries in the garbage may be unlawful under state and
federal environmental laws and regulations. Always take
used batteries to your local battery-recycling center.
• The lithium-ion rechargeable battery used in this device
may present a risk of fire or chemical burn if mistreated.
Do not expose to fire or excessive temperature.
• For questions or instructions for the various ways to charge
this device, refer to the illustrations inthis operating
instructions.
• If this device is accessible to or may be used by a minor,
purchasing adult agrees to be solely responsible for
providing supervision, instruction, and warnings. Purchaser
agrees to defend, indemnify, and hold Manufacturer
harmless for any claims or damages arising from
unintended use or misuse by a minor.
• All products have gone through a thorough quality
assurance inspection. If you find that your device is
excessively hot, is emitting odor, is deformed, abraded, cut,
or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use and
contact Manufacturer.
• This device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction.
• Switch off the power bank when not in use.
CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat
Above (100°C) or Incinerate. Do not place any metal
obstructions between the wireless charging pad and your
electronic device while charging wirelessly. Follow
Manufacturer’s Instructions.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Specifications
Warranty and Contact Information
INCLUDED ITEMS
- Wireless Charging Dock
- Wireless Charging Power Bank
- AC Charging Adapter
Wireless Charging Power Bank
Wireless Charging Dock
1 | USB Type-C Input/Output
2 | USB A Output
3 | Wireless Charging Output
4 | Wireless Charging ON/OFF Button
5 | Battery Indicators
6 | Power Bank Pogo Pin Input
7 | Wireless Charging LED Indicator
OPERATING INSTRUCTIONS
The HALO WIRELESS CHARGING DOCK can be charged using
the supplied wall plug. The charge time is 3-4 hours.
There are several ways to charge your smartphone.
1. Via Wireless Charging Power Bank
2. Via the USB-A or USB-C port on the Wireless Charging
Power Bank.
3. Via Wireless Charging Power Bank while connected to the
charging dock.
4. Via built-in wireless pad on the HALO WIRELESS CHARGING
DOCK
5. Via the USBA output port on the back of the wireless
charging dock.
SETTING THE CLOCK DISPLAY
To set the correct time, locate the adjustment buttons on the
back of the charging dock base.
S Button: Press the button to select the hours or minutes
value to adjust. Blinking will indicate the value has been
selected.
V Button: Press button to increase the selected value.
V Button: Press button to decrease the selected value.
AM/PM Selection: Scroll the time in 12 hour increments to
change from AM to PM.
10,000 POWER BANK BATTERY INDICATORS
The top most battery indicator will turn from blue to green
when smartphone is successfully being charged wirelessly.
When the smartphone is on the dock, LED Indicator 1 will be
white. When the Power Bank is on the dock, LED Indicator 2
will be white.
CHARGING YOUR PERSONAL ELECTRONIC DEVICE
Use the appropriate USB charging cable with the HALO
WIRELESS CHARGING DOCK to charge your electronic device.
Once your electronic device is connected, it will begin
charging automatically.
NOTE:
• Use the USB cable that was supplied with your electronic
device.
• The HALO WIRELESS CHARGING DOCK may be charged and
discharged simultaneously.
SPECIFICATIONS
Wireless Charging Power Bank
Battery Capacity: Contains 10,000mAh internal battery/ 37Wh
Type-C PD Input: 5V 3A, 9V 2A, 12V 1.5A
Pogo Pin Input: 9V 2A
Type-C PD Output: 5V 3A, 9V 2A, 12V 1.5A
USB-A Output: DC 5V 3A, DC 9V 2A
DC 12V 1.5A
Wireless Output: 5W, 7.5W, 10W (Max)
Power Bank Dimensions: 2.9 x 6 x 0.6 inches
Weight: 0.53 lbs
Operating Temperature: 32°F - 113°F (0 - 45°C)
Wireless Charging Dock
Wireless Charging Dock Input: DC 9V 4A
Wireless Output: 5W, 7.5W, 10W (Max)
USB-A Output: DC 5V 2A
Pogo Pin Output: 9V 2A
Charging Dock Dimensions: 7.5 x 3.9 x 1.2 inches
Weight: 0.36 lbs
Operating Temperature: 32°F - 113°F (0 - 45°C)
COMPLIANCE WITH FCC REGULATION
This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for
help.
• Any changes or modifications not expressly approved
by the party responsible for compliance could void
the user's authority to operate the equipment
CAUTION: To comply with the limits of the Class B digital
device, pursuant to Part 15 of the FCC Rules, this device must
be used with certified peripherals and shielded cables. All
peripherals must be shielded and grounded. Operation with
non-certified peripherals or non-shielded cables may result in
interference to radio or reception.
LEGAL
Manufacturer shall not in any way be liable to you or to any
third party for any damages you or any third party may suffer
as a result of use, intended or unintended, or misuse of this
product in conjunction with any device or accessory other
than the appropriate device for which this product is
designed. Manufacturer will not be responsible for any
damages you or any third party may suffer as a result of
misuse of this product as outlined above. Purchaser agrees to
defend, indemnify, and hold Manufacturer harmless for any
claims or damages arising from unintended use or misuse,
including use with an unintended device.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free
from defects in material and workmanship under normal use.
For all questions about the warranty or exchange requests,
please call 888-907-6274, or contact us at
https://www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s
obligations and liabilities with respect to the product. All
implied warranties, including without limitation the implied
warranties of merchantability and fitness for a particular
purpose, are limited to the duration of this Limited Warranty.
In no event shall HALO be liable for any incidental, special,
consequential or punitive damages or any damages or losses
of or to electronic equipment or products that are used with
any of HALO’s products.