FS20W
12
7) in operation, when the power is lower than specified value, the machine will automatically
stop working, and there is a buzzer alarm, at this time need to charger the machine. Only
close the key to stop the buzzer alarm. if there is still small amount of work has not been
completed, you can reopen the key, adopt single motor operation, when the single motor
operation is also alarm, you must charge the machine.
8
）
Brush lifting and pressure application
1. To raise the brush, step down on the Brush Lift
Pedal until it locks in position
.
2. To lower the brush , slightly step on the Brush Lift
Pedal to unlock it, and raise it up slowly into
position
.
3. If you want to add the pressure to the brush, lift
the Pedal into position
. But this is just
extremely dirty place, you can not put the brush
in this position during your whole operation, or
the floor will be damaged.
5. Battery placement and inspection
Batteries generally will be placed in
the machine before leaving factory,
when received new machine, please
check if the machine is damaged
during transportation, release the
fixing screw of water tank, the
machine shell could be backward
rollover, please check the following:
1) Whether the battery has a shift, the
connection is firm
；
the battery warranty period is six month, during warranty period uncoditional
replacement if manufacturing quality problems. battery charging should be
completed once, if regular space charge to replace full charge, will cause
battery damage, please pay attention to avoid! after the loss of electricity or
electricity to run out of alarm does not charge, after a period of time to continue
to use, the battery damage easily.
