FS20W
9
If use water from the tap water faucet, you
could directly into the machine side of water
hold, but pay attention to the water level, so as
not to clean liquid overflow
！
Start work:
1
）
Add water into solution tank, assemble the
brush pad or pad driver with mat, then
you can start your work, and there are
two styles for your reference:
If the working place is too large, you can choose style 1.
(as the right figure shows)
If the working place is long and narrow, you can choose style 2.
(as the right figure shows)
2) The key point for high efficiency cleaning:
detach the dirty from floor surface and take the dirty
away from your working place.
3
）
In order to improve your work efficiency, pay
attention to control during operation, try to
clean surface press one by one, do not appear
leak, with least operation to complete
work(shown at right)
4) If the recovery tank is full, the suction motor
will be stopped automatically. At this time,
you need to empty the recovery tank and
re-add the water into solution tank.
5) Repeat like this, can you do it?
注水口注水
Cleaned floor
Cleaning floor
Water filling nozzle
Water filling pipe
