D3000
Series
–
User
Manual
–
D3000
‐
USER
‐
EN/09F/v2
‐
9
Test panel sound
Press [
OK
] to start the test. The display will read “Panel sounder ON” and the main
sounder inside the building will be heard. Press [
OK
] to end the test.
View log
Press [
OK
] to view the log. You will then have 3 options as described below:
View full log
This option allows you to see all entries in the event log.
View alarm log
This option allows you to see the alarm entries in the event log.
View user log
This option allows you to see the entries in the event log relating to user activity.
To view the selected log, press [
OK
]. You will then be asked to enter a start date (i.e. the
date of the oldest event to be viewed); change this if required then press [
OK
].
You will then be asked to end an end date (i.e. the date of the newest event to be viewed);
change this if required, then press [
OK
].
The display will now show each event and the date and time it occurred, starting with the
most recent. Pressing the [
flip
] key may display additional information for the displayed
event. Use the [
↑
] and [
↓
] keys to move up and down through the event log. When you have
finished, press the [
esc
] key.
Change your own code
To change your user code, press [
OK
]. The bottom line of the display will then show a string
of “
*
”, showing that a code exists (
NOTE
: you are not able to see what the code is). Enter
your new user code followed by [
OK
] to overwrite the old code.
Add / delete users
Before entering this option, ensure that you have a record of all the users on the system. To
edit user details, press [
OK
] when this option is displayed.
- Use the [
↑
] and [
↓
] keys to display the user number to be edited. Press [
OK
].
- The user code for that user can then be entered (new user) or changed if required
(existing user). If the display shows a string of “
*
” characters, then a code already
exists. Press [
OK
] to leave the code unchanged, or enter the new user code
followed by [
OK
]. To delete this user, press [
C
] to clear the code followed by [
OK
].
- The user name can then be changed (if required). Press [
OK
] to leave the user
name unchanged, or enter a new name as required (user the [
↑
] and [
↓
] keys to move
around the name, or clear the display with [
C
]). Press [
OK
] to accept the user name.
Refer to Appendix 1 for text entry using the keypad.
- User attributes can then be changed for this user (if required) as follows: to select or
de-select the attribute, press the [
flip
] key. A “
-
“ character on the display means that
the relevant attribute is de-selected. Press [
A
] will select all the attributes, whereas
pressing [
C
] will clear all the attributes.
Access control
The first “
A
” on the display indicates that the user code has no access to setting or
un-setting the system, or to the menus. Entry of a user code with the access control
attribute activates an output – this is usually used for door entry.
