Model XE530s
Work Troubleshooting
Parts
4
The
Belt
Rev
Procedures
1.
If the Belt drops off, release right
Chain cover and loosen the Idler
Wheel Assembly and return the Belt.
Turn the Belt slowly and watch for
the swing and the alignment of the
Belt, Drive Pulley and Flywheel.
Then revolve the Drive Pulley with
speed between 100 and 120 RPM
and stop abruptly to see if there is
anything abnormal. Resume the unit
if there is nothing wrong, as shown
in figure 1.
2.
If there is misalignment, adjust the
Flywheel to a proper position, which
had been done prior to shipping, as
shown in figure 2.
3.
If the Belt slips, adjust the nut on
J-bolt with 13 mm wrench, as shown
in figure 2 and 3 (refer to procedures
6).
1
2
3
