Model XE530s
Work
Disassembling and Replacing
Parts
5
Cross
Bar
Rev
Procedure
1.
Follow procedures 2, 3 and 4 to take
apart Connecting Arm, Pedal Arm
and both Chain Covers.
2.
Use a sharp stick to take off Round
Disk Cover, as shown in figure 1.
3.
Use 12 mm wrench to release 5/16"
x 15m/m hex head bolt with 5/16" x
35 x 1.5T flat washer then use M6
wrench to release M8x30 socket
head cap screw and take off Cross
Bar with Round Disk Cover, Crank,
as shown in figures 2 and 3.
4.
Separate the Cross Bar apart from
Round Disk Cover, Crank by using
Phillips head screwdriver to release
8pcs of 5x16 tapping screws and
1/4"x19 flat washers, as shown in
figure 4.
1
2
3
4
