Dyaco ST95-YT007, Service Manual

Page: 57 / 82

S S e e r r v v i i c c e e M M a a n n u u a a l l
-57-
8.6 MAINTENANCE MENU
1. Press and hold the Start , Stop and Enter key at the same time, until the display shows
“Engineering mode” (it may say maintenance menu, depending on version).Press the Enter key.
2. You can now scroll through the menu using the Speed ▲ / ▼ keys. Use the Stop key to
return to previous menu selection. The menu selections are:
A. Key Test - Will allow you to test all the keys to make sure they are functioning
B . Display Test - Tests all the display functions
C . Functions - Press Enter to access settings, use Speed
▲
/
▼
keys to scroll
I. Display Mode - Turn off to have the console power down automatically after 30 minutes of inactivity
II. Pause Mode - Turned on to allow 5 minutes of pause, turn off to have console pause in definitely
III. Maintenance - Reset lube message and odometer readings
IV. Units - Choose from English or Metric display readings
V. Key Tone - Will turn on/off beeping noise that is made when keys are pressed.
D. Security - Allows you to lock the keypad so no unauthorized use of the machine is allowed. When the child lock is enabled, the console will not allow
the keypad to operate unless you press and hold the Start and Enter buttons for 3 seconds to unlock the console.
E . Exit