Dyaco ST95-YT007, Service Manual

Page: 42 / 82

S S e e r r v v i i c c e e M M a a n n u u a a l l
-42-
Checking the speed sensor
1) Remove the motor cover hood.
2) The speed sensor is located on the left side of the frame, right next to the front roller pulley (the pulley
will have a belt around it that also goes to the motor). The speed sensor is small and black with a wire
connected to it.
3) Make sure the sensor is as close as possible to the pulley without touching it. You will see a magnet on
the face of the pulley; make sure the sensor is aligned with the magnet. There is a screw that holds the
sensor in place that needs to be loosened to adjust the sensor. Re-tighten the screw when finished.
Reed switch RPM
Speed sensor device
Sensor magnet
Is sensor cable
connected properly?