Dyaco 78562, Service Manual

Page: 81 / 87

81
7. Maintenance menu / Software
RPM SENSOR TEST
Purpose of this setting is to test the functionality of the RPM detection system.

Press PLAY KEY to enter RPM SENSOR TEST.
o
REED ON RPM displays ON or OFF.
o
When REED Switch is Closed, displays ON.
o
When REED Switch is Open, displays OFF.

Press PLAY KEY to exit to setting screen.

Press + KEY for next screen or RESET CONSOLE to exit MAINTENANCE MODE.
LED BRIGHTNESS
Purpose of this setting is to change the brightness of the display.

Press PLAY KEY to change setting.

Default brightness setting is 2.

Press + KEY or
– KEY switch between LED Brightness 1, 2, or 3.

Press PLAY KEY to accept and exit to setting screen.

Press + KEY for next screen or RESET CONSOLE to exit MAINTENANCE MODE.
ANT+ ID SETUP
- Purpose of this setting is
allowing numbering of the bike when using a Leaderboard™ software, such as Performance IQ or similar.

Press PLAY KEY to change setting.

Console will display ANT+ ID SETUP, and 0 on the lower console and flash.

Press + KEY or
– KEY adjust the bike number to the desired number. Over 1,000 are available.

Press PLAY KEY to accept, bike number will stop flashing momentarily then turn off indicating set.

Press + KEY for next screen or RESET CONSOLE to exit MAINTENANCE MODE.