Dyaco 78556, Service Manual

Page: 113 / 123

113
10. Part Replacement Guide
10.1.3 Motor Replacement
4) As shown in Figure 4.3.3, use tool to release the belt (T-sleeve) and remove the belt from the motor.
Figure 4.3.3
5) Remove the four M10 caps to remove the motor.
Figure 4.3.4
6) Replace the motor. The motor needs to push forward.
7) Adjust the required belt tension, the value can be adjusted to 120 ~ 130Hz.
8) Connect the motor ground wire and all the wires connecting motor with control panel.