Dyaco 78556, Service Manual

Page: 104 / 123

104
8. General Maintenance
Treadbelt Tracking Adjustment
The treadmill is designed in that way, that the tread-belt remains reasonably centered while in use. It is normal for some belts to drift near one
side while in use, depending on a user’s gait and if they favor one leg. But if during use the belt continues to move toward one side, adjustments
are necessary.
SETTING TREAD-BELT TRACKING
An 6mm Allen wrench is provided for this adjustment. Make tracking adjustments on the left side bolt. Set belt speed at 3 kph. Be aware that a
small adjustment can make a dramatic difference which may not be apparent right away. If the belt is too close to the left side, then turn the bolt
only a 1/4 turn to the right (clockwise) and wait a few minutes for the belt to adjust itself. Continue to make 1/4 turns until the belt stabilizes in
the center of the running deck.
If the belt is too close to the right side, turn the bolt counter-clockwise.
The belt may require periodic tracking adjustment depending on use and walking/running
characteristics. Some users may affect tracking differently. Expect to make adjustments as
required to center the tread-belt. Adjustments will become less of a maintenance concern as
the belt is used. Proper belt tracking is an owner responsibility common with all treadmills.
ATTENTION
Damage to the running belt resulting from improper tracking / tension adjustments is not covered under the warranty.
In order to maintain the safety level and the ease of use of the device, the below instructions for general maintenance
should be followed:
Daily (by the user)
Computer, upholstery, handgrips
Clean the device after every workout with a soft cloth, so that the following users have a clean device available.
Daily
(by staff)
Complete unit
Complete cleaning and removal of all traces of sweat with a suitable cleaning cloth to ensure a clean, efficient device.