1.
Top part: Remove the pre-installed axle and screw from the top of
the Left Side Tube (
18
). Now assemble the Left Side Tube to the
Vertical Arm (
11
) with the axle and screw removed previously. Make
sure the axle is aligned with the indentation of the U-bracket on the
Left Side Tube (
18
) when assembling. Repeat the same procedures
on the Right Side Tube assembly.
Bottom part: Connect the rod end bearing with the U-bracket of the
left pedal tube and then fasten with one Bolt (
98
), one Flat Washer
(
119
), and one Nylon Nut (
112
) by using Wrench (
139
) and 6mm L
Allen Wrench (
140
). Repeat the same procedures on the Right Side
Tube assembly.
