Dyaco Canada everlast 1654915 Owner'S Manual Download | Manualshive

Page: 7 / 43

background image

Customer Service 1-888-707-1880

Dyaco Canada Inc. 2014

Email: [email protected]

6

!!ATTENTION: IMPORTANT UNPACKING INSTRUCTIONS. PLEASE
READ BEFORE UNPACKING YOUR FOLDING TREADMILL!!

Serious injury could occur if this folding treadmill is not unpacked properly.

There is a Velcro strap installed around the treadmill base that prevents the treadmill
from unfolding accidentally during shipping. If this strap is not removed properly the
treadmill could spring open unexpectedly and cause injury if someone is standing near
the treadmill when the strap is removed.

To ensure your personal safety during removal of the shipping strap please make sure the treadmill is
positioned flat on the ground, in the orientation it would be in if you were using the treadmill. Do not
turn the treadmill up on its side while removing the shipping strap. This could cause the treadmill’s
folding mechanism to spring open. If the end of the Velcro strap (that you need to grab to remove it)
happens to be under the treadmill deck, reach under the deck to grab it, but do not tilt the treadmill up
to gain access to the strap end.

Unpack the treadmill and locate the hardware pack. The hardware pack is separated into five
sections; one section containing tools and four sections labeled steps 1-4 which contain the
hardware needed for assembly of each step. The assembly steps below are numbered one through
four and correspond to the hardware in the numbered sections of the hardware pack. Remove only
the hardware for the step you are currently assembling to avoid confusion and mix-ups.

Assembly Instructions

«
...
5
6
7
8
9
...
»

Summary of Contents for everlast 1654915












































Reviews:

No comments

Related manuals for everlast 1654915

Brand: ProForm Pages: 40

Brand: LifeSpan Pages: 57

Brand: Weslo Pages: 16

Viewpoint 3600 Treadmill

Brand: NordicTrack Pages: 34

T14.0 NETL12710.2

Brand: NordicTrack Pages: 36

Brand: NordicTrack Pages: 32

Brand: Weslo Pages: 28

Brand: Weslo Pages: 19

Cadence 75 Treadmill

Brand: Weslo Pages: 23

Brand: Weslo Pages: 12

Cadence 1000 Fm

Brand: Weslo Pages: 24

Brand: inshape Pages: 53

Brand: BH FITNESS Pages: 63

Brand: Dyaco Canada Pages: 32

Brand: Orbit Pages: 24

Brand: Orbit Pages: 25

Brand: Orbit Pages: 25

Brand: Orbit Pages: 45

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands