Customer Service 1-888-707-1880
Dyaco Canada Inc. 2014
Email: [email protected]
18
WINDOW DISPLAY
Speed
: Displays the current speed from starting at 0.5 mph to 12 mph.
（
Display shows M,MI, ML means MPH
）
Time
: Displays your elapsed workout time in minutes up to 99:59.
Counts down from your preset target time to 0:00 during your workout.
Distance
: Displays the distance traveled in miles.
Calories
: Displays the cumulative calories burned at any given time during your workout.
Note: This is a rough guide used for comparison of different exercise sessions, which cannot be used
for medical purposes.
Pulse
: Displays the user’s current heart rate in beats per minutes during the workout. To display your
heart rate, you must hold both handrails.
Note: This is a rough guide used for comparison of different exercise sessions, which cannot be used
for medical purposes.
Incline
: Displays the incline level during your workout from 0 to 15.
Program
: Displays the program selected.
Audio System
: There is an Audio Input Jack on the front of the console, and built-in speakers. You
may plug any low-level audio source signal into this port.
Audio sources include: MP3 player, iPod, portable radio, CD player or even a TV or
computer.
Getting started:
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power switch
located at the front of the treadmill below the motor hood. Ensure that the safety key is installed, as
the treadmill will not power on without it.
When the power is turned on, all the lights on the display will light for a short time. Then the
Time
and
Distance
windows will display Odometer readings for a short time. The
Time
window will
show how many hours the treadmill has been in use and the
Distance
window will show how
many miles (or Kilometers if the treadmill is set to metric readings) the treadmill has gone. Then a
message will scroll across the message window showing the current software version. The
treadmill will then enter idle mode, which is the starting point for operation.
Quick-Start Operation:
STEP 1:
Press and release the
Start
key to wake display up
(if not already on).
Note: I
nstalling the tether key will also wake up the console.
STEP 2:
Press and release the
Start
key to
begin belt movement,
at .5 mph, then
adjust to the desired speed using the
Fast / Slow
keys (console or hand rail). You may also use
the rapid speed keys 2 through 12 to adjust the speed.
STEP 3:
To slow tread-belt press and hold the
Slow
key (console or hand rail) to the desired
speed. You may also press the rapid speed adjust keys, 2 through 12.
STEP 4:
To stop the tread-belt press and release red
Stop
key.
